PC -> Sattcon 15 (COMLI) IBMTERM

Hi,

I want to replace an really old terminal program that a customer is using and it's called TERMIBM has any one any idéas about another program that i can use to replace this one with?

Since i'm trying to connect to the Sattcon/15 thru a serial hub the old program can't connect to the PLC...

/Thanks

Thomas

Here a link you might try: Kepware Sattbus driver depending on what you want to do.

You can use any terminal emulator in place of TERMIBM.
Windows Hyperterminal will work if set up correctly. It's some years since i've programmed SATCON PLC's so I can't remember how to set it up.