johnfarrugi
Member
On a CLX PLC using a serco card communicating to an Ultra 3000 drive, What units is the feedback torque using? %, NM....?
CLX SERVO SERCO Torque Feedback?
- Thread starter johnfarrugi
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
It's a REAL datatype tag in units of percentage of rated torque.
User Manual 1756-UM006, Page 389:
User Manual 1756-UM006, Page 389:
Similar Topics
More specifically, will Position Error Faults still be generated if an abnormal load is present?
My machine has two servo axis being geared...
I have a press steel feeder application which I need some help with. Currently there are three servos being controller through a CLX PLC, sercos...
I have an application with a compact logix running three servos through a serco card. I can see in the table that there is a register allocated...
I have an application that allows an operator to jog a servo forward or reverse, slow or fast speed with push buttons. As I understand the MAJ...
Controller: 1756-L84E v.35
Prosoft MVI56E-MNETC for ModbusTCP/IP
I'm having an issue with some of my write commands. The write command that...