i have to start a sequence with XBTN-400(2). FOR DO IT
I have a bit instruction (%MW10:X10) and apply that in parallel with in my plc program(%MW10:X10-------%QO.O), and use this bit in my XBTN program to trigger the wanted action
my question
is it enough for send my command to plc and my plc accept this command?
I have a bit instruction (%MW10:X10) and apply that in parallel with in my plc program(%MW10:X10-------%QO.O), and use this bit in my XBTN program to trigger the wanted action
my question
is it enough for send my command to plc and my plc accept this command?
Last edited: