s7200 network cp5511

has

Member
H
Join Date
Apr 2008
Location
montreal
Posts
3
hi,
i have four s7200 connected ppi, somme thing hapened, it's not possible to acceess two of my plc throuth the cp5511 mpode mpi,
it found the adresses but says unkwon device. i check every thing ??

i can access with the cable pc/ppi but not with cp5511 before was working good

thanks for help!
 

Similar Topics

M
S7200 CPU222 to Citect V6.0 LAN Network
Dear All, I successfully tested S7200 CPU222 and Citect V6.0. The PC is connected to the LAN network and I want the two other Client PC to...
Replies
4
Views
2,252
zankorel
Z
A
AKD BS7200 software
Hi there! I know this is playing in archeologist, but I need to tune a bit some older Kollmorgen/AKD Digifas 7100 servo drive. Any chance of...
Replies
3
Views
1,138
autobus
A
A
Plc siemens s7200
hey guys here first time for me in this awesome forum actually i have S7-200 connected to Winview HMI and HMI project file has lost and broken...
Replies
0
Views
600
Affrian
A
C
TD200 and S7200
If a TD200 program was created with the wizard in Microwin does anyone know if the code for the TD200 would be uploaded to micowin when doing a...
Replies
0
Views
1,176
cottagewood
C
B
S7200
Hi, I have a S7200 PLC with PC based WinCC Scada. This PC was replaced due HD failure and replace with a back-up PC provided by the contractor...
Replies
2
Views
1,625
Borgj
B
Back
Top Bottom