genset ignition controller problem

Hi dears,
we have HCI IC-900 ignition controller. we are facing problem no ignition signel from controller to coils. we have check all three signels from speed sensors which is ok. power LED let, system LED in blinking. When try to start engine triger LED, Reset LED and cam LED flashing. but no ignition at spark plugs. If anybody have such experiance, please halp us.

Beast Regards

hic 900 ignition controller

Hi,
usually there is a jumper at ignition controller if there is no ignition at the time of startup then check for this jumper. This jumper must be open at startup otherwise ignition controller will not work. That contacts are (sensor gnd,contact A)


Feel free for further inquiry
Faheem Munsif
03077777200

????????A TWO year delay in a response to this question...I hope that the poor poster isn't still trying to start that engine!!!!!!

David