conversion s5 to s7

dek7

Member
Join Date
Aug 2008
Location
tuins
Posts
7
hello every body,i am new in conversion and in order to convert fb250 and fb251 (read /write analogic data) i want to know how can i implement fc105 end fc106 in source s7 ?
thinks a lot!
 
In Simatic Manager, select the FC105 or the FC106 block and hit F1 to get help.

If I remember correctly FB250/FB251 converted to integers. As FC105/FC106 converts to/from REALs, you will have to consider if you want to continue with REALs or INTs in the converted program. Then adjust your program accordingly.
 

Similar Topics

I have a Type C to RS485 adapter connect to my Siemens RWF55. I use modscan to scan it to get a value from the Siemens controller. In the...
Replies
4
Views
75
Hi all, I'm in the process of upgrading a PanelView1200 HMI program to be developed in FactroyTalk View Studio. The filetype for PanelView 1200...
Replies
7
Views
245
Hi All , I am working for a project to convert S5 PLC to S7 PLC system for a Concrete Block making machine of OMAG . I request guidence and...
Replies
11
Views
543
Hello, I have converted RSView 32 to FTView SE 14 (I have tested FTView 12 before as well and there were some difficulties so I moved on to...
Replies
4
Views
185
Hi, Im doing a project with a Power meter that offers Modbus TCP and each signal is a 32bit Float.¨ I tested the float in Modbus Poll and...
Replies
22
Views
2,962
Back
Top Bottom