Data table on Operator Panel on Honeywell HC900

I have one question...I was able to get horizontal trend for measuring by PT100. Could i get this measuring displayed in some table view, like data table?, for example: that i can see the exact value in all past scan cicles..

And it has to be on operator panel...

something like this:

Time:........... Value:
15:14:11 ........... 0
15:14:13 ........... 0.5
15:14:15 ........... 1.71
15:14:17 ........... 3.48
15:14:19 ........... 5.1
15:14:21 ........... 7.4
15:14:23 ........... 9.57
15:14:25 ........... 11.31

If you are using Honeywell's 1042 or 559 Operator Interface (O/I), the answer is no. The O/I have defined functionality with specific screens and functions. As you might have discovered, the O/I is not a custom-programmable graphic display. It has a set of predefined display objects.

The feature you describe, a listing of time stamps and process variables, is what Honeywell calls "tabular" format on their paper strip chart recorders, but nothing like that is implemented on the HC-900 O/I.

Dan

thx!