Hello every body,
I have an Analog I/O card with the input signal range of
0 to 5 V, 1 to 5 V, 0 to 10 V, –10 to 10 V
I want to use it with 24v battery, so if the battery goes lower than certain volts system indicate for charging.
how can i use this card with 24v, or how would i drop the voltage but keeping the watts same.
Thanks in advance for any help.
I have an Analog I/O card with the input signal range of
0 to 5 V, 1 to 5 V, 0 to 10 V, –10 to 10 V
I want to use it with 24v battery, so if the battery goes lower than certain volts system indicate for charging.
how can i use this card with 24v, or how would i drop the voltage but keeping the watts same.
Thanks in advance for any help.