PLC S7 400 & WinCC Communication

RezaSoleimani

Member
R
Join Date
Dec 2007
Location
Tehran
Posts
18
There is a control system by PLC S7-400 include CP 443-1 that controled by two station of WinCC.
Each of computers communicate to PLC by an Industrial Ethernet card (CP 1613) and TCP/IP protocol.
I wana to connect to PLC with a laptop without CP 1613 card.
Is it possible to do this by computer network card?
 
Hii there
You can connect your laptop with PLC without CP1613.
Just plug ethernet cable to LAN port of your laptop. Check connection by pinging.
Mnameet
 

Similar Topics

H
Could i connect simatic WinCC runtime with Micrologix 1400 PLC via Modbus
Hi guys, Could i connect simatic WinCC runtime with Micrologix 1400 PLC via Modbus?
Replies
0
Views
1,243
HamzaAhmed
H
Y
Maximum Number of stations (wincc,op panel ,..) that can connect to a plc s400
Hi I need your help I want know that how many stations(wincc,op panel ,..) can connect to a plc S7-400 cpu417. According Technical...
Replies
3
Views
2,291
Jeebs
J
G
Loss of Communication between S7-400 plc and OS Server (WinCC)
Hello, I am facing a communication problem.There is a loss of communication between S7-400 Plc and OS Server (WinCC).When this problem occurs all...
Replies
1
Views
2,250
gauskhan
G
C
Network connection in Step 7 - S7400 PLC to WinCC OS
Hi all Hoping someone could point me to what I'm missing. I have a Step7 multiproject with a two projects in it (I called these B150 and WinCC)...
Replies
1
Views
6,745
cfbosch
C
mohitkataria012
Controlling SEW MDX61B drive with S7 400 PLC via Profibus using DFP21B Gateway
Hi All, I am facing one issue with the SEW MDX61B drive. Issue- I want to run a conveyor with this drive in two directions but it runs in...
Replies
0
Views
339
mohitkataria012
mohitkataria012
Back
Top Bottom