Slc To E 300

Hi All

I have a E300 connected to a slc 5/03 via a AJ 45.I want to set up
the serial poert on the 5/05 to be 485 no problem.I was hoping that
some one would be able to tell me what pin on the 9 din serial
would match the pins on the RJ 45.

Thanks again

Donnchadh K

The RJ-45 connector has RS485 signals and the DB connector has RS232 signal levels so no pins translate (hence the different style of connector). You'll need a signal converter at the minimum and because I don't know what a E300 is, possibly a protocol converter.

Hi you probably need a cab10, list price £77 uk.




Cheers

HI All



Thanks for your help.I have ordered the cable today and should have it early next week.



Thanks again



Donnchadh K