DINVERTER AC Inverter

glenncovington

Lifetime Supporting Member
Join Date
Apr 2002
Location
Gloucester, VA
Posts
302
This is not a PLC Question, Sorry in advance, but I have found this forum to be extremely helpful on many subjects.

I have an Italian piece of machinery that uses an AC inverter brand name DINVERTER. Does anyone know if there is any US distributors for this brand?

thanks in advance :D
 
Hi Glen,

This sounds like a control techniques drive,i have used them before but as somebody suggested they were the bottom of the line vfd before being replaced by the SE commander.Both drives are useful and will do most applications but there is limitations compared to the unidrive version which would be top of the range.If you need information on these drives then drop me your e-mail address and i will forward on the manuals which i have in pdf format. beerchug
 

Similar Topics

Hi folk, I would like to know what kind of Parameters should I setup for controlling with Profibus. My old Lenze 8200 motec 0.25kW have a busted...
Replies
0
Views
79
Hi; In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
Replies
16
Views
499
I have Toyopuc PLC PC10G-CPU and some communication modules of it. With this modules I'm able to connect with Ethernet, Ethernet/IP, FLnet, FRMT...
Replies
0
Views
88
Hello I am writing to request assistance with obtaining a specific GSD file for our Mitsubishi inverter type A800-E, which is connected to our...
Replies
12
Views
421
Hi all, We are currently experiencing an DC over voltage fault on one of our inverters. During commissioning a snag was raised whereby excess...
Replies
0
Views
196
Back
Top Bottom