Hi folks, I need to link to a FX-16MR and 2x A2Acpu
mitsubish PLCs. I need some advice on a appropriate
OPC server and PC linking method. I came to understand
that the SC-09 cable can plug to programming port
and gives a RS232 output ? Is this true for both
series. Which OPC server can support both the
above series.
thanks
Selvam.
mitsubish PLCs. I need some advice on a appropriate
OPC server and PC linking method. I came to understand
that the SC-09 cable can plug to programming port
and gives a RS232 output ? Is this true for both
series. Which OPC server can support both the
above series.
thanks
Selvam.