johnfarrugi
Member
In RSL500, you select if you want to see the indirect tag name or the indirect tag value in your program. Is it possible to do the same thing in RSL5000?
CLX indirect tag value
- Thread starter johnfarrugi
- Start date
kiwi sparky
Member
No, cant set it up like RSLogix500 to show value in indirect address tag. However if you want to see value temporarily in the indirect address tag, wave mouse over tag and tag value will be displayed in pop up box
Similar Topics
Any one have any ideas on how to do this in CLX
Thanks
Good Morning:
Using a 1756-L61 running version 17.2, I FAULTED the processor with the attached logic. Fault was not immediate, but didn't take...
Controller: 1756-L84E v.35
Prosoft MVI56E-MNETC for ModbusTCP/IP
I'm having an issue with some of my write commands. The write command that...
I have several Avery scale units and they are configured as Generic Ethernet modules, and I am actually reading the data fine for the weight...
What's the best way to move a tag value from the panelview+7 to the clx plc. We display amps from a power meter on the panelview screen, read in...