TWIDO & S7-300 PROFIBUS COMMUNICATION

HansAndersen

Member
H
Join Date
Sep 2006
Location
Hamburg
Posts
132
I searched the web, but could not find anything about this communication.Is there anybody applyed a project like this.

Any reply would be appreciated
 
As far as I am aware the Twido cannot talk Profibus. It would either be Modbus RTU, Modbus TCP/IP or CANOpen.

Jon.
 

Similar Topics

T
Problem with Twido TWDLMDA40DTK
Hi guys!! I'm New here and new with this type of plcs i have TWDLMDA40DTK and i need to get a copy of the program and i don't have an original...
Replies
6
Views
682
ThePhantom
T
R
Twido Read Input Address
Dear friend, how to read the input register (3xxxxx) of device from twido plc. i have tried the comm macro but it always read the holding register...
Replies
3
Views
1,566
drbitboy
drbitboy
P
Help twido program
Good, how do I control through an Analog output of a valve, that is, open the valve from 10% to 10% until it reaches 100%, and then close it...
Replies
4
Views
2,230
parky
P
R
Schneider Twido reset
Hi! I bought a secondhand Twido base unit to help me learn programming and also faultfind expansion modules (one of my customers machines uses...
Replies
4
Views
1,681
Ryan Collins
R
T
Schneider Twido to Magelis comms
We're a second hand machinery merchant. We've just had a machine arrive that has a Schneider Twido TWDLCAA24DRF PLC and a Magelis XBT-R411 HMI...
Replies
4
Views
2,396
technolog
T
Back
Top Bottom