Hi........If PQW512 of the analog module is updated by the logic of our program, then does it hold its value after the execution of the instruction that updated its value until that instruction executes again and updates its value again?????
PQW512 value updation and retention
- Thread starter SEEMA
- Start date
L D[AR2P#0.0]
Lifetime Supporting Member
Yes.
Similar Topics
I cannot add SLC500 analog input tag (I: 8.3) to EZSeries Touch Panel Editor (V 5.3). I used all the listed tag datatype but it all says "Invalid...
I want to set user security level based on the value of a tag in my PLC called "ActiveUser". That tag will contain the A-P code which we use for...
hello. In Intouch, I want the color of the alarm window in the header menu to change depending on the priority value of the tag.
To do this, I...
I have a Type C to RS485 adapter connect to my Siemens RWF55. I use modscan to scan it to get a value from the Siemens controller. In the...
I'm pretty new to PLC's, so forgive me if I use the wrong terminology and whatnot. We have an issue at work where we have a flow meter that is...
