cornbread Lifetime Supporting Member C Join Date Feb 2007 Location madison, indiana Posts 407 Nov 18, 2008 #1 Can you make a panelview 1000 automatic adjust for daylight saving time?
LJBMatt Member L Join Date Apr 2004 Location Dayton, OH Posts 430 Nov 18, 2008 #2 Not that I know of. About the only way to do it is to have the PLC write out the new hour to the Panelview hour read tag. You can write ladder code to handle this.
Not that I know of. About the only way to do it is to have the PLC write out the new hour to the Panelview hour read tag. You can write ladder code to handle this.
bobwithdana Member B Join Date Dec 2003 Location california Posts 239 Nov 18, 2008 #3 If its a panelview plus 1000 then YES you can choose the time zone and correct for Daylight savings time.
If its a panelview plus 1000 then YES you can choose the time zone and correct for Daylight savings time.
cornbread Lifetime Supporting Member OP C Join Date Feb 2007 Location madison, indiana Posts 407 Nov 18, 2008 #4 Just a Panelview.
kbpatton Member Join Date Feb 2008 Location Cleveland, OH Posts 80 Nov 18, 2008 #5 All of my panelviews get there time directly from the PLC. We then run scripts through our SCADA to change all of the PLC times.
All of my panelviews get there time directly from the PLC. We then run scripts through our SCADA to change all of the PLC times.