PLC mean!!!
- Thread starter moody088
- Start date
geniusintraining
Lifetime Supporting Member + Moderator
ivo.maenen
Member
- Join Date
- Nov 2003
- Posts
- 663
https://mall.automation.siemens.com/NL/guest/index.asp?aktprim=0&lang=en&nodeID=5000039&foldersopen=-1344-1-1345-1346-1347-1412-1417-&jumpto=1417
C = compact
DP = Profibus decentral periferie
IFM = integrated function module
PN = Profinet
M = ?
C = compact
DP = Profibus decentral periferie
IFM = integrated function module
PN = Profinet
M = ?
edda
Member
I think that the M7 was a Microcontroller from Siemens that you could load your own C-code in... But not 100% sure... 
Similar Topics
What does the "@" sign means in ladder programming? Documentation explains the @ specifies an indirect DM address in binary mode ... offset an...
plese talk me
what diferance in Arc sin, arc tan and sin , tan function
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Hi All,
Someone at work has put a PLC system on my desk, that's just been taken off an idle production line.
He said "It's an S7 PLC. We don't...
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...