Logo! 230rcl

hi, guys.. I'm beginner in this type of PLC and I dont have the PLC it self and the manual.

I really need to know about internal Timer that this type of PLC profides.. How many is it?

please anybody give me the answer so i will not make mistake to buy the type of PLC. I need 15 internal timers. thank you

The LOGO! isn't a PLC, it's a "Programmable Relay"...

The product brochure say 16 timers. You can download LOGO! manuals,etc. HERE

beerchug

-Eric

In general, you don't need to have LOGO! to start work with it. You can download LogoSoft Comfort software and test your program with simulator. Try following link: http://www.ad.siemens.de/logo/ftp/upgrade_v4/install.htm

Siemens LOGO! SoftComfort V4.0 (Demo Version)it´s a great choice to begin with LOGO!.
You can simulate the program you created, and its very simple to use.
If your LOGO!230RCL is firmware version 0BA0, you won´t have the complete set of instructions of new ones. You can download both demo and manuals at Siemens site.
Best regards.