Using Simcode Pro v High and Low words

CliveBaker

Member
CliveBaker
Join Date
Sep 2005
Location
Midlands
Posts
83
Hi All,
I have to get Active power from a simocode and it comes with High and Low words what is the best way of doing it in Ladder, or STL.
 

Similar Topics

A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
46
Alibaba07
A
T
Using Patch Panels in Control Panels
Adding ethernet equipment to an existing panel that has none. We have some solid ethernet cables coming from other remote cabinets that I plan to...
Replies
3
Views
109
nicherbert
N
K
RS485 Modbus RTU using PC com port in Twincat 3 issues
I'm trying to control a device via MODBUS RTU and the ModbusRtuMasterV2_PcCOM in Twincat 3. I've configured a device with the right com port and...
Replies
7
Views
217
Jkoso
J
L
Using RAs IO Device Library with 1576-ENBT
Hi, I'm trying to use the IO Device Library (Product Versions) which is configured to work with the 1756-EN4TR & 1756-EN2TR but my system uses...
Replies
0
Views
54
LabRat906
L
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
99
Para
P
Back
Top Bottom