Illegal command from local processor DH+

MGuenette

Member
M
Join Date
Jan 2007
Location
Montreal
Posts
134
Hi,

As soon as I enable a msg (CLX INT to SLC INT) instruction on CH.B, I got this fault "illegal command from local processor" and I'm loosing communication on Ch.A

What this error message mean? I did not found anything intesresting on the forum.

thanks a lot.
Martin.
 

Similar Topics

V
DF-1 Micrologix String Writes -- Illegal Command or Format?
Hi everyone, I'm working on a third-party Allen-Bradley driver in C, and I'm trying to use the Typed Write command (0x0F 0x67) to write to the ST...
Replies
10
Views
8,445
vorfeed
V
A
Illegal data address
Hi everybody, I have DELTA PLC DVP-32ES and I have make a simple project in WPLSoft. using the input X0 to switch ON the output Y0 and using the...
Replies
0
Views
160
AhmedMOLO
A
S
FTV ME Import Database Illegal Character
Hi, I am having troubles importing a 500 internal database for tags on FTV ME i am getting invalid tag name Cause: Illegal character ('') at...
Replies
1
Views
1,116
spukemiszer
S
J
Modbus TCP Illegal data address error from Micro820 to Red Lion Graphite HMI
I have the HMI setup as shown in the picture. Then from my PLC and from the handy Baseblock ComTest Pro program I get a illegal data address. "...
Replies
8
Views
4,414
JeffreyS
J
M
UDT usage in SCL illegal data transfer Error
Hello Expert, i have illegal data transfer error while i compile below code and please point me where i did mistake :utoh:. That is only self...
Replies
2
Views
1,578
MOeZ
M
Back
Top Bottom