Communicating S7200 via RS232
- Thread starter sraja
- Start date
PLucas
Member
The cable you require has the Siemens part number :- 6ES7 901-3BF00-0XA0.
Just a word of advice, do not attempt to build one of these yourself, the cable contains a protocol convertor and it will end up costing a lot more than buying the cable from Siemens.
Paul
Just a word of advice, do not attempt to build one of these yourself, the cable contains a protocol convertor and it will end up costing a lot more than buying the cable from Siemens.
Paul
Similar Topics
Dear All
I have to communicate S7200 PLC with Ifix Scada software. For this purpose we are using Point-to-Point (PPI) S7-200 Communications...
Dear All Please help me about Below picture problem.PLC not communicating proper.
I need to recommend a PC to replace a customer's old Windows 7 computer. The only thing I need to think through is the serial com port to...
Hello Friends,
We have a powerflex that stopped working sometime last week. It doesn't communicate over the network, or use CCW directly from my...
Hi All
I'm trying to connect two zebra printers to th PLC through Ethernet. I can ping the Printer through my laptop connected to the private...