a.camacho
Member
Hi!
I'm having trouble when connecting a Proface ST403 to a Siemens PLC via ethernet. On the PLC side I have a CPU314 with a CP343-1 Ethernet card hooked up to a hub. I'm not using WinCC.
To try and set up the connection I gave an IP address and port to the Proface Screen and also to the PLC. On the PLC side using NetPro I set up a new station with the IP address and the port of the Proface screen. Also I use AGSend and AGReceive to try and stablish the connection. The Proface Screen displays PLC COM, ERROR (02:FE:0E), I don't know if this is the correct way to do it, or if it can be done like this, but I couldn't find any documentation on how the set up the Siemens communication part.
Hope you can help.
Best Regards
I'm having trouble when connecting a Proface ST403 to a Siemens PLC via ethernet. On the PLC side I have a CPU314 with a CP343-1 Ethernet card hooked up to a hub. I'm not using WinCC.
To try and set up the connection I gave an IP address and port to the Proface Screen and also to the PLC. On the PLC side using NetPro I set up a new station with the IP address and the port of the Proface screen. Also I use AGSend and AGReceive to try and stablish the connection. The Proface Screen displays PLC COM, ERROR (02:FE:0E), I don't know if this is the correct way to do it, or if it can be done like this, but I couldn't find any documentation on how the set up the Siemens communication part.
Hope you can help.
Best Regards
