help averaging fpo plc out put

shawzay

Member
S
Join Date
Jan 2009
Location
new york
Posts
1
I have an fp0 plc controlling 2 axis take up machine. The first axis has an encoder on it that the plc is counting the pulses and using counter to count and form the output for speed ref for second axis the analog output is varying too much causing the new drive and motor to surge in velocity mode. Can some one help me average the out put form the timers.
Newbie
 
Last edited:

Similar Topics

afm
Automation studio help: averaging analog sensor values every 2 seconds
Hi, I have a bit of PLC experience in Siemens and have unfortunately been blessed with working on Automation Studio and B&R which has been a big...
Replies
5
Views
1,363
drforsythe
D
D
RSLogix 5000 averaging help
Hi folks, First and foremost, credit where credit's due, thank you daba for the averaging sample provided in a separate post back in 2013. I've...
Replies
6
Views
3,914
DarrenG
D
D
Help with TCSEGDB23F24FA M340 Modbus Plus Proxy Module
Hi Everyone, i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
Replies
9
Views
83
chud
chud
B
A little Ladder logic help
Hello, I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...
Replies
9
Views
103
drbitboy
drbitboy
M
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
HOW to communicate with OPTIX and Mitsubishi's Q Series PLC?? PLEASE HELP ME
Replies
0
Views
37
MIIN
M
Back
Top Bottom