how to communcate with panelview 1000e?

alfredxa

Member
A
Join Date
Feb 2004
Posts
3
hi
everyone,I have a question.I have a contrologix L5555 cpu in local chassis,there have other chassis too,in a remote chassis have a 1756-dhrio module,it conmmuncate with a panelview 1000e by dh+.commmuncation between chassis is controlnet .my question is how to commnncate betweent CPU and panelview 1000.
thankyou everyone, I am from china,my english is not very good.
 

Similar Topics

H
Logix 5000 Communcate Keyence Laser Marker
I have a 1769-L27ERM-QBFC1B PLC and MD-F3100 Keyence Laser Marker. I am looking to communicate with this laser using Ethernet TCP/IP. The PLC is...
Replies
1
Views
4,725
dmargineau
D
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
79
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
54
celso3093
C
T
can i change panelview text using keypad?
Hey all, i have a panelview screen (image attached), with 4 items on it. Program 1, Program 2, ...3, ...4. The PLC i am using is a compactlogix...
Replies
5
Views
169
Ken Roach
Ken Roach
F
PanelView Plus and .CRV Files
Hello All! Ok, we got a Work cell from a Integrator that is sending saved scanning data from the PLC to HMI (Panel View Plus) when I look at this...
Replies
3
Views
80
Foxtrot2050
F
Back
Top Bottom