Shift Register Concept 2.6 Modicon PLC

kearnysteel

Member
K
Join Date
Jan 2009
Location
New Jersey
Posts
1
Can somebody please explain how to program a Shift register in Concept 2.6 for the Modicon PLC (In Ladder Logic)

I don't have years of PLC programming under my belt, just need a simple 8bit shift register to tell me when the line is missing parts in a 7 station segment of an assembly line.

I have no experience in structured, so I really need to do it in LD.

Every other plc shows a Data, Clock and Reset with programmable or user adjustable bit inputs. Concept just has a shift right/left boolean,byte and word function block.

Thanks
 

Similar Topics

H
Shift Register Not Tracking
I am attempting to reject a bottle If the label fails. The rejection works fine at normal line speed but at low speed the rejector fires (air...
2 3
Replies
35
Views
1,121
drbitboy
drbitboy
D
Shift Register and Debounce questions
Hi guys, I am pretty new when it comes to programming. I am working with CX-Programmer and I am having a problem where I have a sensor on my...
Replies
6
Views
676
Dumbplcguy
D
B
is there any way to make a more robust shift register?
Hi all, i have a very slow indexing machine where we are looking to make everything as bulletproof as possible, money is not much of a factor...
Replies
12
Views
3,048
Bobobodopalus
B
drbitboy
Siemens equivalent for simple 128-bit shift register in RSLogix
Good morning (EST), I am trying to implement the code below in on an S7-1200. It's barely half a dozen instructions, but I am stuck; I have not...
2
Replies
26
Views
5,642
drbitboy
drbitboy
B
Shift register help, Siemens s71200
Hi everyone I am completely new to using shift registers and am a bit stuck, my shift register works as should, it is for an overhead conveyor...
2 3 4
Replies
55
Views
15,546
parky
P
Back
Top Bottom