Siemens to IFIX comm's

jdf

Member
J
Join Date
Feb 2006
Location
Herefordshire
Posts
67
Hi All

What I am trying to is reinstate an unused IFIX (v 2.5) SCADA master. I am having problems getting comm’s between SL4 power tool and the PLC CP card. If I changed the MAC address in SL4 and point to another PLC CP card I can get "comm's". I am now wondering if the CP card I am tying used is not singed to be used with SL4? The Siemens part number is 6GK7 343 1EX21 0XE0 (one of the new one's which can act as an PROFINET controller as well). If it is the version of CP card that is the problem can I install SI7 power tool on IFIX 2.5?

Thank you in advance

Jon
 

Similar Topics

T
High Performance GE iFIX Application With Siemens PLC
Hi team! I'm starting some iFIX application migrations and some of them are being developed with the high performance library. Some objects that...
Replies
4
Views
810
cardosocea
C
G
Siemens S7 -> iFix / OPC AE -> Alert
Hello, We have severall Siemens PLC's who are connected with iFix / OPC AE. iFix / OPC AE is connected with Alert (from micromedia-int ). We are...
Replies
2
Views
2,934
genesisfm
G
T
IFix with Siemens S7-300
Hi all, My project is to connect a Siemens s7-300 to IFix 5.0 (if I switch a button on the s7-300, something, a light for example, change too)...
Replies
1
Views
1,855
Tibo1000
T
T
IFix with Siemens S7-300
Hi all, My project is to connect a Siemens s7-300 to IFix 5.0 (if I switch a button on the s7-300, something, a light for example, change too)...
Replies
0
Views
1,285
Tibo1000
T
Q
ifix using si7 with siemens plc
i use ifix communicates with siemens plc through si7,when the picture was opened in ifix,it shows the communication was disconnected and can't...
Replies
0
Views
3,343
qikuidg
Q
Back
Top Bottom