AD Analog F4-04AD

kw2872 · Feb 7, 2009

Is anyone familiar with taking a 4-20ma signal direct to an analog input on a F4-04AD Analog Module. I've measured my ma reading on my two wires and I'm getting the analog signal. I'm having trouble with getting it into the Module. The four available terminals per channel are: V, C, I, and 0V. Any ideas?

geniusintraining · Feb 7, 2009

Do you have the jumpers set correct? see page 4

http://web5.automationdirect.com/static/manuals/d4anlg/ch3.pdf

kw2872 · Feb 7, 2009

AD Analog Module

Thanks for response, yes the jumpers are set to read all four input channels and for 4-20ma.

Clay B. · Feb 7, 2009

Page 11 of the manual Genius posted has your wiring diagram.

kw2872 · Feb 7, 2009

I got it straightened out. Thanks for the responses.

geniusintraining · Feb 7, 2009

kw2872 said:
I got it straightened out. Thanks for the responses.

So what was the issue??

kw2872 · Feb 8, 2009

geniusintraining said:
So what was the issue??

I had the jumpers wrong and wired wrong. I guess it had a reason not to work. Thanks again.

AD Analog F4-04AD

kw2872

Member

geniusintraining

Lifetime Supporting Member + Moderator

kw2872

Member

Clay B.

Lifetime Supporting Member

kw2872

Member

geniusintraining

Lifetime Supporting Member + Moderator

kw2872

Member

Similar Topics