I have CompactLogix CPU with 1768-ENBT/A Ethernet module. I wish to make remote access to this controller from telephone line to make program modification. I cannot find info in AB manual. Is it possible to do that? How to setup and what tools do I need to do that?
CompactLogix with remote access
- Thread starter coa
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
My favorite device for this application is the 9300-RADES dial-in Ethernet server.
http://www.rockwellautomation.com/services/remote/modems/
I have only used these in North America with analog phone lines. Be certain your phone system and the installed lines provide similar service. They don't work through digital phone lines or through many switchboards.
http://www.rockwellautomation.com/services/remote/modems/
I have only used these in North America with analog phone lines. Be certain your phone system and the installed lines provide similar service. They don't work through digital phone lines or through many switchboards.
Similar Topics
I have a project where I will need around 20 IO cards. I'll probably have 5 on a compactlogix L320ER and 15 or 20 on a Point IO AENTR module. The...
Hi Guys. I did do alittle searching but nothing came out and answered what I want to know.
Currently, I am helping Design a control system...
Has anybody used the Crevis Remote IO products? I have a NA-9188 Ethernet/IP adapter with a couple of expansion cards I'm trying to connect to a...
Hi all!
I'm using CompactLogix for the first time (CPU L33ER). I've got everything up and running with some local I/O and some remote SLC 500...
All
Moving a subsystem from a ControlLogix RIO to a CompactLogix
processor and RIO. The RIO is from an Ethernet to RIO adapter
from Prosoft...