Glofa g7m plc

BlueQuartz

Member
B
Join Date
Mar 2009
Location
Amman
Posts
1
Hi,

I have GLOFA G7M PLC, I need to copy the program from it to another PLC,

I start GMWIN then Project>Upload Project from PLC, then it asks for password. I enter the password

but then it says that There is no upload program to PLC:smas:

what can I do, I really need to copy the program to another PLC.

Please advise.
 
I have same problem. But do not want password from me.A read from PLC type flash... but can't read project (routines..) Help some?
 

Similar Topics

A
[Topic (read)] Connection between Glofa G7m LS PLC and WinCC Flex
Hi all, I wanna Connect Glofa G7m LS PLC to WinCC Flex i have no Serial port in my laptop so i use USB to serial converter and...
Replies
0
Views
2,504
amr.elsebaye
A
A
GLOFA G7M PLC Password removal
Hi all, Recently I have been to one site where they are running GOLFA G7M PLC. I tried to upload the project from the PLC with the free...
Replies
0
Views
4,432
aradhonline
A
H
Glofa G7M Communication
Anyone have any experience connecting to a Glofa G7M-DR60U? I made a RS232 cable according to the pinout on page 8-2 in the manual (2->7, 3->4...
Replies
3
Views
2,264
DJones183
D
JeffKiper
LG Glofa PLC
Does anyone have a source for LG PLC in the USA? Im on a job and the customer doesn't have any information.
Replies
1
Views
1,207
OkiePC
OkiePC
A
how to use modbus communication with LS PLC Glofa GM4C
Dear all Please guide me to use modbus communication by using LS PLC Glofa GM4 series, i haven't the guide book for modbus (GM4C series). Thanks...
Replies
0
Views
3,630
aidil
A
Back
Top Bottom