RedLion G310C00

OmarM

Member
Join Date
Jan 2009
Location
California
Posts
13
Hi guys, I heave to send a Text message to a cell phone from this specific RedLion HMI when my system has an alarm. I need some help with this application.
 
Another important thing is, I don't have a GSA Modem but I going to have a VPN access.

You will need to set up the mail manager in the communications setup. Set an email account under the SMTP tab, and the addresses under the addresses tab. Then on your tags, under the alarm section, you can choose to have the alarm emailed.

Under most cell phone carriers, you can email a text message to a phone. For verizon, it is the 10 digit cell phone number (no spaces or hyphens)@vztext.com (ie [email protected])

But be aware, that while text messages are often instantanious. Most providers don't make any garantee on the timeliness of a text message. They can sometimes take up to 24 hours.

-MUR
 

Similar Topics

Hey guys, hoping someone here could give me a little advice. I'm working with a CR1000-04000 in Crimson 3.1 and I was interested in adding the...
Replies
4
Views
114
Hi, I have a complex database in Crimson 3.0 and in one of the display pages I am trying to get a tag to show the sum of several other tags. The...
Replies
3
Views
161
Hi All, Hoping to get some insight into best way to terminate shielded twisted pair + common into a RJ45 required for RedLion RS485...
Replies
3
Views
218
I have 8 of these systems all running the same code. Just this one seem to gain about 30 seconds in time everyday. So in 48hrs time will be...
Replies
3
Views
654
Hello, can anyone help with what driver to use in Crimson to communicate Ethernet/IP to a Prosoft PLX31-EIP-MBS gateway. The gateway will pull...
Replies
6
Views
821
Back
Top Bottom