Watch Dog

learner

Lifetime Supporting Member
L
Join Date
Apr 2007
Location
British Columbia
Posts
81
Software: RSLogix 5000
PLC:compact logix
Protocol: Modbus

Hi

Could you please tell me if there is a standard way of setting a watchdog between a PLC and DCS. I'm just looking for a fairly standard way of doing this.

Regards

Always a LEARNER
 

Similar Topics

S
FESTO CPX-CMAX-1-1 Watch dog error
In case packer they used festo axis controller to drive the cylinder. This axis controller contains some data. While running condition once a...
Replies
8
Views
2,327
Jeev
Jeev
A
Heart beat or watch dog instruction for checking PLC's alive
Hi Guys, I have two Allen-Bradley systems here 1) 1769-L30ERMS 2)1768-L43S These both are safety plcs and its working at the moment. There are...
Replies
1
Views
1,487
gclshortt
gclshortt
R
watch dog timer
I recently put in a machine that had been rewired with automation direct 06 PLC. We experienced a total shut down a couple of time a week that...
Replies
0
Views
1,953
roxusa
R
W
Slc 500 watch dog time and PID loop update time
Hi All, I want to know There is some relationship between SLC500 or PLC5, Controllogix watchdog time and PID loop update time. Does it need to set...
Replies
2
Views
5,263
wilsonzhu
W
S
watch dog timer in S7 300(step7)
hello all in my SCADA i wanted to provide PLC healthy/Fail signal. but im unable to get the address of this signal. can any body help me do i need...
Replies
3
Views
5,898
Nick B
Nick B
Back
Top Bottom