Plc s7-200

zafar choudhary

Member
Z
Join Date
Nov 2006
Location
(Multan)Pakistan
Posts
18
I am unable to do program edit in run mode. When I connect my PC with PLC, it showd on line status well but as I go to program edit in run mode, it is not allowed. Edit prompt is appeared but editing target or parameter which I want to edit or tune are not changed.
Would anybody help me in this regards.
Zafar
 
Plc2-700

When I connect to PLC and checked on line programm status. My half ladder is hghlited in blue colour while half is not highlighted. See attachment. Due to that problem I can not program edit in run mode also.
any body elp me please
Zafar Iqbal
 

Similar Topics

J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
79
jimix
J
K
PLC S7 1200 fail to go online
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Replies
5
Views
218
tarik1978
T
R
Siemens S7-1200 profinet communication with codesys plc
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
2 3
Replies
43
Views
2,846
raghu_k
R
M
Upload from PLC (s7-1200 version 3.0) to PG/PC
Hello members, I have Siemens S7-1200 PLC (CPU 1214C AC/DC/Rly version 3.0) and I want to get backup from it. I know how the procedure works. I...
Replies
0
Views
137
Maaz Saqib
M
P
Firmware for PLC S7-1200
Hi! Please share firmware for 6ES7212-1BE31-0XB0 https://support.industry.siemens.com/cs/nl/en/view/64789124
Replies
7
Views
746
p-nik
P
Back
Top Bottom