Modbus Communication

Lokman

Member
L
Join Date
Feb 2009
Location
Dhaka
Posts
5
Dear all,

%MW50:X01 will be replace by 40051,01
or %MW50:X01 will be replace by 40051.1

Which one is right?

Regards,
Hossain
 
Last edited:

Similar Topics

Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
29
Voltimus
Voltimus
S
Modbus communication help
Hi all I need help on this As in my project used Schneider TM241 controller. Now I want to communicate Elite energy meter with controller by...
Replies
3
Views
87
Corsair
C
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
167
jillgeorge18
J
A
FATEK modbus TCP communication fail with energy meter
Hi, i cant establish communication between fatek plc with an energy meter, both capable for modbus tcp, i did with modscan but fatek plc does not...
Replies
1
Views
141
plctobal
P
K
Problems with Micro820 communication as Modbus RTU Master
Hi Guys, I am a new member and this is my first post! I have a little PLC experience but it is mostly with siemens logo and using ladder...
Replies
4
Views
890
drbitboy
drbitboy
Back
Top Bottom