lost pasword UNIOP touch pannel

has anione a idea how i can log in on a UNIOP touch pannel without a password>i lost the password.
or is there a solution to resseting the password
it is also notpossible to working with the software without the password code>>the code is a 4 digit
the UNIOP pannel is type CP11G
tnx on advance for ani suggestion

Assuming you have the Uniop software and cable you can try this method listed in the user's manual. But be sure to note the warning.

Note: If Configuration Mode is locked out, hold down (continue holding down the three arrow keys), and power the unit back up. Make sure that the project file is saved before attempting this!

Click to expand...