Tilea_Ioan
Member
Hi, I am a student who has to do a project for my university ,I`m in my final year studying electromechanical engineering .
I`m trying to do something whit the siemens micromaster 440 who i connect to the computer whit a RS232-RS485 via USS -COM LINK using the STARTER software .The problem is that i don`t know how to work very well whit the STARTER software the only thing that i have is the HELP from the software ,and that is not very good , so far i only manage to start the motor and change the speed in control panel.
I whant to do basic things for educational purpose whit MM 440 on a asynchronous motor of 300W .If someone has a "step by step" using STARTER , some tutorials or lessons whit STARTER software , please help me!
I`m trying to do something whit the siemens micromaster 440 who i connect to the computer whit a RS232-RS485 via USS -COM LINK using the STARTER software .The problem is that i don`t know how to work very well whit the STARTER software the only thing that i have is the HELP from the software ,and that is not very good , so far i only manage to start the motor and change the speed in control panel.
I whant to do basic things for educational purpose whit MM 440 on a asynchronous motor of 300W .If someone has a "step by step" using STARTER , some tutorials or lessons whit STARTER software , please help me!