plc uplaoding program

enghmk

Member
E
Join Date
Apr 2009
Location
Alex
Posts
3
dear mr.eng

in fact while the uploading for the plc program from S7 315-DP, there was two errors message As follwing:

error 120 then error 2000 and i hope that you explain for me the meaning or description of this errors

AS the uploaded program with out any DP slaves only the master
 

Similar Topics

Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
31
Voltimus
Voltimus
P
PLC MICROLOGIX 1000 AND 1761-NET-ENI
"Hello! Good day! Excuse me, I have a question regarding the 1761-NET-ENI. RSLinx has already detected it but it's not connecting to the PLC...
Replies
4
Views
57
roxusa
R
B
$115 plc-restart running, how to fix
How to fix if appears code “$115 plc-restart running” on the screen OP17
Replies
2
Views
82
Bagussetyo99
B
Rsflipflop256
Setting up a modbus network on a DL262 Directlogic PLC with Siemens LMV 3 Burner controllers as slaves, eight of them, with OCI 412.10 Interface
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
2
Replies
20
Views
188
Rsflipflop256
Rsflipflop256
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
56
jimix
J
Back
Top Bottom