PCS7 Microbox WinCC OS server

A.A.A.

Member
A
Join Date
Mar 2009
Location
Lebanon
Posts
6
I have a PCS7 process running on a OS server where I can modify the blocks and values on the WinCC Runtime,
I need to control the process from a Microbox connected to the OS Server with an Ethernet connection.

Is there a way to do this?
 

Similar Topics

A
MODBUS MASTER/SLAVE PCS7 9.1 SP1
Does anyone have an example project of the cm ptp ET200 SP HA with 410-5H DCS (PCs7 9.1 SP1) for MODBUS MASTER/SLAVE communication ?
Replies
2
Views
125
Arun Kumar Yadav
A
F
TIA Portal installation with PCS7
Hello, Is there a sequence when installing both TIA Portal and PCS7 in the same PC? First TIA and then PCS7 or viceversa? Thanks in advance.
Replies
0
Views
484
Facu2998
F
F
Project PCS7 Alarms in TIA portal
Hello, I'm currently working on a project involving both PCS7 (v9.1 sp2 upd1) and a Panel Comfort system. This necessitates the use of TIA Portal...
Replies
2
Views
791
Facu2998
F
R
Brand New to the PCS7 Block World: Tank level control
I'm coming from a background of PLC ladderlogic/rockwell products. I am new to blocks. Can you point me in right right direction? What I would...
Replies
5
Views
1,558
Peter Nachtwey
Peter Nachtwey
H
PCS7 V8.2 Reading actual day
Hello everyone, i would like to read in pcs7 v8.2 the actual day of the month(ex 1 or 25 of the month) i used as attached read_CLK AND DT_DATE but...
Replies
4
Views
1,934
Ken Moore
Ken Moore
Back
Top Bottom