S7 hardware config

thanks for clarifying. I did actually think that downloading meant putting config from PG to PLC made sense - but an operator (obviously a slow one) confused me- cheers
 

Similar Topics

D
5069-FPD in hardware config?
Logix Designer 5000 V33 pro I have a 5069 backplane in the hardware config with 13 slots. In 3 of those slots, I need to have a 5069-FPD. When I...
Replies
2
Views
1,917
dahnuguy
D
A
PLC Hardware Config.
Hi, Please I am new to Siemens Step 7 Simatic manager. I have a system with s7 300 cpu which has a profibus interface module IM 153-2. Inside the...
Replies
8
Views
2,697
Akan
A
D
export hardware config tia portal
In RSLogix 5000, I can export the hardware config and import it to another controller... Is this allowed in TIA Portal V15.1? And if so where...
Replies
2
Views
6,851
Caporeira
C
I
Step 7 deactivating profinet devices in hardware config
Hello, I have a Step7 5.5 project with a large number of profinet devices which will be activated/deactivated from time to time. I can use SFC12...
Replies
5
Views
2,897
mk42
M
M
E300 hardware config
I'm setting up some E300's for an impending MCC upgrade, and I'm having some issues. I have the 193-EIOGP control modules, specifically...
Replies
0
Views
1,330
maxfli11
M
Back
Top Bottom