Simatic S5

I have a PLC Simatic S5 and have installed the software step 5 on pc with win98, but i dont know the name of the software for desing and build the SCADA screen for my own process??

Also required if someone has the diagram cable rs232-TTY for the PLC simatic s5 or the db15 pin out conector description.

Thank you for your answers.

Eric from chile

criminalinsano said:

I have a PLC Simatic S5 and have installed the software step 5 on pc with win98, but i dont know the name of the software for desing and build the SCADA screen for my own process??

Click to expand...

Step 5 has nothing to do with SCADA. You can use any SCADA program you like with S5 as long as it has the drivers to communicate. Some examples are: WinCC, CitectSCADA, Lookout, WizCon and a lot more.

criminalinsano said:

Also required if someone has the diagram cable rs232-TTY for the PLC simatic s5 or the db15 pin out conector description.

Click to expand...

Searching this forum for "20mA converter" should bring up this thread amongst others.

Kind regards,

S5

Thanks Jean