xbtn-400 firmware
- Thread starter mo_eng
- Start date
Most firmware updates are at www.schneider-electric.com
Go to automation and follow the xbt links onto the downloads page
Go to automation and follow the xbt links onto the downloads page
Similar Topics
i have to start a sequence with XBTN-400(2). FOR DO IT
I have a bit instruction (%MW10:X10) and apply that in parallel with in my plc...
HI all
I want to monitor Pressure in a liquid line. I use a presere transmitter (4-20ma)And scale that in the hardware configuration.(0-350psi)...
Hi Gurus,
I am usin Magelis for monitoring/ Controlling a process.
Monitoring the inputs/outputs was easy,..converted them to %MW and used...
hi all
i have to build conection cable for connect xbtn 401 to pc ,twido plc .
how can i build that?
I have a micro1400 processor running two routines (transfer compression/compression molding press). Recipe parameters are stored from job to job...