compactLogix status

LogicON

Member
Join Date
Apr 2008
Location
mayo
Posts
44
Does anyone know the status bits/words for a compactLogix 1769L35E. I want to display them on a HMI. I'm looking for the Tagname for the following status bits
"Run Mode"
"Controller OK"
"Battery OK"
"I/O Not Responding"
 
For Run/Faulted/Program modes, look up:
GSV ControllerDevice Status

For battery information, look up:
GSV FaultLog MinorFaultBits

For I/O information (Controller LED), look up:
GSV MODULE LEDStatus

For specific I/O Module information, use
GSV MODULE (Target_Module)
 

Similar Topics

I have a DLR setup with a few nodes, a compactlogix and a stratix5700. The setup works, but what I'm looking for is a way to turn the DLR status...
Replies
3
Views
1,312
Hey guys, We are using a compactlogic 5069-L33 with an Panelview in our project. Currently busy with some diagnostics displays of the PLC and...
Replies
4
Views
1,804
I had an L18ER CompactLogix processor this morning that had all inputs (embedded and PointIO) in a "standby" status. The Network Status indicator...
Replies
0
Views
1,204
Good Evening , I'm finally understanding a MSG instruction a little better. My question is , I'm using a MSG read in a CompactLogix to see...
Replies
3
Views
1,906
I have a problem with a CompactLogix 1769-IQ16 input card. The card is being used in sink mode, the OUTPUTS of the device connected to the card...
Replies
2
Views
2,060
Back
Top Bottom