phil hughes
Lifetime Supporting Member
- Join Date
- May 2005
- Posts
- 31
Any issues flashing our logix processor directly from version 6.3 to version 16
RS logix 5000 v6.3
- Thread starter phil hughes
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
I agree; check the model number carefully and compare it to the firmware relases on the update website:
http://support.rockwellautomation.com/ControlFlash/
If it's really a Version 6 controller, it is not a model that can be upgraded to V16. RA's "Step Forward" program is intended for exactly this sort of migration from older hardware to newer hardware.
http://support.rockwellautomation.com/ControlFlash/
If it's really a Version 6 controller, it is not a model that can be upgraded to V16. RA's "Step Forward" program is intended for exactly this sort of migration from older hardware to newer hardware.
Similar Topics
I am completely stuck on building a ladder program that requires a start button to be pressed 3 times to turn on motor 1. Then motor 2 starts...
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
I have an AOI with revision notes. Someone entered the last note into the description instead of the notes. I cannot just click into the revision...
First off, I'm a hobbyist-level programmer, and this program isn't controlling anything anything that could even remotely be considered "life...