Hello UncleHamid;
The simplest way to do this is to get the pinout of both the M12 connection on the softstarter and the DB9 on the master, purchase the M12 and DB9 sockets, and build a converter cable yourself. One advantage: you have no one else to blame if the connections aren't good, and you know how to correct them.
This will work for a single slave, point to point. If you have a number of them, better you go with some manufacturer that specializes in Profibus "patch" cables, M12 connections, T-connectors for multiple M12-based slaves...
Turck comes to mind, they have a great variety of M12 implements and cables (
www.turck.com) and a representative in
Tehran:
TURCK International Sales Channel
Iran
Shuttle Pars Trading Co. P.J.S.
Mr Hamed Eskandarian (contact)
No 109, Dr Ghandi Ave.
Tehran 15549, Iran
Phone: +9821 8875 1771 and 8874 5973
Fax: +9821 8875 1773 and 8850 1268
Mobile phone: +98 912 5501990
Email:
[email protected]
Hope this helps,
Daniel Chartier