WinCC 6.0 Timer Interface

John Parker

Member
J
Join Date
Mar 2009
Location
Jackson, TN
Posts
14
I am using WinCC 6.0 and need to have the operator change a timer preset value in a ladder on s7-300 cpu. ES software is STEP7 5.3 sp3. I have searched the site and was wanting to make sure there is not an easier way around this. Oh, it is an S5t. Thanks in advance for any help.
 

Similar Topics

A
Wincc flexible to access timer in structure at s7-1200
Dear all, I nead to access parts of structures from s7-1200 plc in wincc flexible running on PC. My problem is that plc programm is done by...
Replies
4
Views
2,944
apetkov5
A
U
WinCC Flexible 2008 and S7-200 timer I/O help
Hello, I'm simply trying to allow the HMI operator to change a S7 timer value. I tagged the preset variable of the S7 timer as a VW. When I enter...
Replies
4
Views
2,738
updownload
U
R
IEC Timer Elapsed time mapping in WinCC
Hi guys! Good day! I would like to ask, how can I possibly map the elapsed time of a simatic IEC timer? I already configured the preset time...
Replies
0
Views
2,538
ry_fern
R
J
Step 7 and wincc flex dealing with timer preset help
Hello I usually represent all my time delay in 0.001sec inside the hmi but know i need to enter values ranging to 2o minutes meaning 1200...
Replies
4
Views
3,601
Paul B
Paul B
J
WinCC flex timer display
I know this must be found from somewhere but i just cant find any info. I would like to display winCC flexible i/o field remaining time from s7...
Replies
1
Views
3,442
danpantea
D
Back
Top Bottom