Clx and Panelview 1000 CN

sts2ss

Member
Join Date
May 2009
Location
Houston
Posts
20
I have set up a PV 1000 via controlnet, all is well as I can download to the PV. But under logix 5000 I added it to the CN network and it doesnt allow me to select FW 4.41, it just goes to 2.x. Also the same in Networx.

I am using the latest EDS.

Thanks
 
OK

I now have the error on the PV under logix
Module fault
Code 16#0304 Not configed to send scheduled data.

I know the CN is scheduled.....

Any ideas?

Thanks
 
Ok I think its a EDS file issue. All of the files I can get on the rockwell site are 2.x I need a 4.x Im not sure why they dont have this updated on the site.

If anyone has this EDS file, please post it.

Thanks alot
 

Similar Topics

I'm converting a Micrologix 1400 (1766-L32BXB) PLC program with a PanelView Plus 6 (2711P-K6M5D8) HMI to a Compactlogix (1769-L30ER) PLC with a...
Replies
1
Views
3,554
Hi All, I currently have a setup using a CLX PLC and a standard Panelview communicating over devicenet. The Panelview displays the current family...
Replies
3
Views
2,400
Hey fellas, I've started work on an in-house project that includes setting up a PV+ 1000 as a node on a Cnet network to talk to a CLX (L62)...
Replies
2
Views
5,059
I am trying to set up a CompactLogix L35E with a PanelView 550 (2711-K5A2) with the intent of trouble shooting the PLC program before I take it...
Replies
6
Views
3,911
I'm trying to set up a CLX processor to a PV 600 via DH+. We are new to control logix and are having trouble figuring out how to address the tags...
Replies
1
Views
3,433
Back
Top Bottom