zen 10C 1DR-D-V2

Looks like the only way is to re-initialize with the software.

The password is a 4 digit number from 0000 to 9999, if that helps at all.......
 
You have to know the password. The breaking of passwords is not discussed here at all.
Contact your local Omron distributor.
 

Similar Topics

N
Compact logic card frozen -1769-if16C
My PLC is currently running the program and the process is still live. One of my 1769-if16C cards values are all frozen but the card is not...
Replies
1
Views
123
ASF
A
P
E300 and PF525 lost ethernet connection device tag data frozen at last state
When E300 powered off, the ethernet device tag data stayed at last know state, for example, fault bit is still Off, ready bit is still ON, status...
Replies
8
Views
1,006
JeremyM
JeremyM
S
Allen Bradley PLC-3 analog values - some change, some frozen
This hasn't become my problem yet, but it may soon... Ancient PLC-3 (yeah, I know) has been humming along for decades. It now has some analog...
Replies
5
Views
2,452
GaryS
G
J
Serial RS232 communication with printer CITIZEN PMU 2300II
I need to print data produced by the program PLC (Beckhoff PLC) from a Citizen PMU 2300 printer. More precisely I need to send the data to the...
Replies
9
Views
3,993
drbitboy
drbitboy
N
PL-2303TA wont connect to Omron ZEN
I am very new so I will try to give as much information as possible. I cannot get a Prolific PL-2303TA USB to RS232 to connect to an Omron ZEN...
Replies
1
Views
1,588
gtsuport
G
Back
Top Bottom