PDA

View Full Version : Security Login no Keyboard


asterof
July 6th, 2009, 05:52 PM
How would one log in if using a touch screen and not a mouse
Thanks

ATU
July 6th, 2009, 06:03 PM
I would think your touchscreen would have some type of keyboard utility. Here is some freeware.

http://www.bestfreewaredownload.com/freeware/t-free-touch-it-virtual-keyboard-freeware-freeware-zdimkyik.html

asterof
July 6th, 2009, 06:11 PM
the touchscreen is not relevant, the software has a log in function
that just pops up a small text enter window, but it will not cause
the pop up keyboard to open
Need a VBA function I think

ATU
July 6th, 2009, 06:14 PM
Is this PC based or a dedicated HMI? What brand?

asterof
July 6th, 2009, 06:46 PM
it is PC based, and it does pop up when using a text entry
field, however the login function is a built in function
that does not pop up the virtual keyboard
RSVIEW32 Rockwell

sthompson
July 6th, 2009, 06:47 PM
Not to mention make and model if you would like us to give you an informed answer.

asterof
July 6th, 2009, 07:35 PM
the computer is not relevant to the issue
any computer with any touch screen would run the
software the same way.
The problem is RSVIEW2's log in function is not geared
to-wards a touch screen.
So the question is how to get around the problem

cjd1965
July 6th, 2009, 08:19 PM
hi i dunno about rsview but if you want auto login then i have created hmi buttons that force user names and passords into the 'active' ones for a cimplicity project. Did this on a system where the ops had to log on to run machine and it was a pain for them

sthompson
July 6th, 2009, 10:18 PM
Actually, it is relevant, you didn't bother to mention it was RSView before. Although it appears you have a typo, I presume you meant RSView32. We use it with touch screens, and it works fine. Create a button to login, and open an onscreen keyboard. There are ones you can download from AB/Rockwell Automation, or you can build your own using Sendkeys.

Stu....