Conecting CPU S7-212 with Omron NS12 via HMI-GWY module

fribeiro

Member
F
Join Date
Dec 2003
Location
Almada
Posts
40
Hi,

Is there anybody tried before to use the HMI-GWY module to conect a Siemens S7-212 with NS12?
Well, i can configure the module HMI-GWY with the blocks i want with success, but i cant get communication!!!!
Wich cable should i use in S7 side? The PC/PPI converter or the normal 2 lines cable with Siemens connectors?

Any help should be appreciate! Thanks.
 

Similar Topics

P
Conecting HMI directly to Yaskawa A1000 VFD
Has anyone ever tried to connect an HMI to a Yaskawa A1000 VFD? If so, what HMI did you use and what communications protocol? I want to try to...
Replies
4
Views
2,073
BryanG
B
W
Red lion hmi G306A conecting to Eaton Elc
Looking for some help on the red lion side I was able to diver out all the port settings to get the hmi to talk to elc having the are-485 light to...
Replies
1
Views
1,102
OkiePC
OkiePC
A
Conecting M221 to ATV312
Hello, I'm trying to conect this devices with Modbus RTU using Somachine basic but I don't get any response. The speed, parity, bits and timeout...
Replies
11
Views
9,752
HPhong
H
J
conecting Labview with s5
Hi i'm new to this forum, and not familiar with plc therms in English. So please write with this in mind. I will try to connect my labview...
Replies
1
Views
2,276
shooter
S
A
Conecting of PLC output to FAN/tube Light
Hi Dear all i am workinh with plc i have controlled a single bit of digital output module.now i want to on/off the tubelight using this bit please...
Replies
1
Views
2,078
RussB
RussB
Back
Top Bottom