PG/PC socket in profibus connector
- Thread starter hosein
- Start date
The idea is that the Profibus Loop cables will "daisy chain" through the connector which will plug into your DP device (e.g PLC DP Port), to access the loop with a programmer (laptop), you would plug the cable from the laptop into the PG/PC port.
So it is just an access point for a programmer.
LH
So it is just an access point for a programmer.
LH
Similar Topics
we bought some ABB soft starter (PST85-600-70)they are supposed to connect a cpu315 via profibus but all softstarter use M12 profibus socket...
Hi Everybody,
newbie here with PLCs, using a B&R plc.
I'm playing with a printer and its tcp socket communication.
Connection works fine if...
Hi all,
I have two questions I am hoping someone might have some information on.
1. I remembered reading somewhere on this forum that you could...
Hello,
I'm trying to setup a TCP connection from a Compactlogix 5069-L306ER to a TDI checkweigher to receive real-time weight data of the...
I would like to communication with application installation in my printer server via TCP port 5450. i.e ., 71.16.40.200:5450 . How can i write...
