Cognex & Micrologix Communication

junior

Member
J
Join Date
Jan 2006
Location
Seattle
Posts
271
I have a Cognex 5100 vision camera and it's going to be interfacting with a micrologix 1100 PLC. The PLC has an ethernet port on it, and the camera has an ethernet connection also. I'm wondering if there's a way to have the two communicating over ethernet?

Jr.
 

Similar Topics

M
Micrologix 1100 and Insight Cognex Communication
Hi all happy users, Does anyone knows how to retrieve the value in a Rockwell MicroLogix 1100 after sending a GV (Get Value) native command to...
Replies
14
Views
10,204
FactoryTalktotheHand
F
L
trigger cognex camera from micrologix 1100
Hi I want trigger an insight 5400 camera from micrologix 1100 Ch1(ethernet port), I've done from slc500 trough msg instruction and st...
Replies
10
Views
8,821
MAHIA
M
T
Micrologix 1500 to Cognex via NET-ENI
Does anyone have an example of a ML1500 connected to a Cognex 5100? I'm getting conflicting info from Rockwell saying it only can be done with a...
Replies
5
Views
2,645
TimWilborne
TimWilborne
croakus
Re-purpose a Cognex Sensorview monitor
We finally replaced our Cognex Checker with an IV-3 and I'm wondering if can replace the s/w in the monitor with anything else. I haven't been...
Replies
0
Views
100
croakus
croakus
J
RSLogix 5000 and Cognex In-Sight Explorer 5.9 - Will not Read/Write data
Thank you for any and all responses/help. I have an RSLogix 5000 v20 and a Cognex In-Sight v5.9 spreadsheet (8502P). I can not figure out how to...
Replies
0
Views
129
JEM
J
Back
Top Bottom